How To Change Water Heater Element

There is always a possibility that you might have to fix your water heater. Sometimes there is a need to replace the water heater’s element, in case it is not working correctly or no longer working at all. Even if it has stopped working, you are not supposed to purchase a new one without also trying to fix it.

If the element is not working at all, it can be replaced or fixed, but it has to be done by due care. Replacing the aspect of water heater might seem complicated for you, but it is not impossible that you cannot do it by yourself. Most of the people do it by themselves, here are few tips and necessary things to consider while you are changing the water heater element.

Preparing to change the water heater element:

The elements are also known as immersion heaters. It is due to the reason that they remain fully immersed in the water of the storage tank. You should be aware of the fact that they get only utilized in the electric water heaters. In the case of gas water heaters, the heat generates differently.

Style of the Element:

There are 2-styles of heating elements that you should know about it.

There are 2-different styles of heating elements:

  • Bolt-in: In case you have an older version of the water heater, then there is a chance that you might have the bolt-in item. You will see that this element will get secured with the help of 4 bolts.
  • Screw-in: This is the most common type of element because most of the water heaters have it. The item gets put in place with the help of screws.

What are the necessary things to change the element?

When you want to change your water heater’s elements, then you need to get the following things:

  1. First of all, you will need a new heater element, which must be the one that is with the “O” ring.
  2. A tester, to test the voltage
  3. The wrench for the water heater
  4. Of course, the screwdriver to do its part
  5. The garden hose

So, now that you have all these things with you, you are ready to change the water heater’s element. We are going to tell you the whole procedure of doing so, and then you will be able to change the item without any hassle. You need to keep one thing in your mind that you will be dealing with water and electricity at the same time, which is not a mixture that we more often come across.

In this case, when you are not feeling comfortable in changing the water heater element, you can call the professionals to do it for you.

Step by step guidelines on how to Change Water Heater Element:

Step 1: Turn OFF the Power:

First of all, you are supposed to turn the power off, which is the circuit breaker at the electrical panel. You need to perform a voltage test to make sure that the power is no reaching the water heater. It would be best if you kept in mind that you are working water and electricity, so it is essential to take the precautionary measure of turning off the power.

Step 2: Attaching the hose to the drain valve:

The second thing you should be doing is attaching a hose to the drain valve and then opening the valve. On this point you should not be draining the tank, you have to check that there is no clogging.

In case there is clogging, you will be fixing this first. You can change the water heating element without draining the storage tank.

Step 3: Turn OFF the Water

The third important thing is to turn off the water supply to the water heater; this can get done by closing the cold water inlet valve. Most commonly it situated above the radiator.

Then release the pressure of hot water, by allowing the air into the tank. This task can get done by opening a nearby faucet. You are supposed to open the hot water tap, not the cold one. Then leave that tap open for a while.

Step 4: The access panel cover should get removed

To remove the access panel cover, you are supposed to use a screwdriver. The upper panel generally located at the high water element. Whereas the lower panel finds at, the lower part. There usually is insulation between the thermostat and the panel door. You are supposed to set the padding aside in a dry place. will notice that the thermostat must have a plastic cover. You should be removing this cover very gently. Then check the wires with the help of a voltmeter to make sure that there is no electricity power.

Then inspect the wiring, check if any of the wires are damaged such as melted parts. The installation can be damaged if the sediment has caused an element to heat excessively. This damaged wiring should get repaired. Losing the screws and disconnecting the two wired of the element from the heating element, is the crucial part.

Step 5: Remove the Heating Element

It would be best if you were using a heating element wrench to remove the element. This wrench is specifically designed to remove the item; it has a significant more full mouth that will get fixed over the exposed part of the component.

While the storage tank still has water in it, you should be slightly losing the element in a counter-clockwise manner. Due to the sea, the container will stay in place. When you have done with losing it, drain the tank.

Removing the element is now begin. You will see a rubber gasket or “O” ring which seals the tank. Make sure you remove the “O” ring, remove the element now.

Step 6: Installation

Attach the new “O” ring along with the original element; make sure you are not using the older “O” ring. Push the item into the tank gently and then tighten it with the help of the wrench. You need to make sure that you are attaching the two wires to the element and then screwing it properly. Refill the tank by closing the drain valve, by turning on the water supply to the heater. How  to Change Water Heater Element